Indonesia Leading Online Shopping Marketplace

BLACKMAGIC DESIGN ATEM Studio Converter 2 (SWRCONVRCK2)

Belum Ada Penilaian
0 Dijual
Rp 35.343.000 / Per Barang

Color


kuantitas

2 Sisa Barang

Total :
Rp 35.343.000

Peninjauan Luas Toko


VBIZZ
11 months ago
Semua Produk 1371
Pengikut 0
Penilaian 0
Bergabung 11 Bulan Lalu
Peringkat Pembatalan 0%

Spesifikasi Produk


Kategori
: Peralatan Rumah  >  Audio  >  Suku Cadang & Aksesoris
Brand
: Not Specified
Model
: Not Specified
SKU
: SWRCONVRCK2
Dimensi (Panjang x Lebar x Tinggi)
: 20.00 x 50.00 x 9.00
Berat(g)
: 3000
Negara Manufaktur
: Not Specified
Jenis Garansi
: No Warranty
Nilai Garansi
: -
Deskripsi Garansi
: -

Deskripsi Produk


The Blackmagic Design Studio Converter 2 inputs video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison, sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.

A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This setup allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.

The Converter 2 can also be used as 4 independent simultaneous bidirectional SD/HD-SDI to optical converters. The Converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1 RU design with built in rackmount ears for easy integration into existing studio configurations or production cases.

Optical Fiber Connectors
The ATEM Studio Converter 2 uses standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.

Talkback and Tally
The unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or if the area is too loud. When connected to the ATEM Camera Converter, you can talk to your camera operators no matter how far away they are, without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.

Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allows you to control who hears what.
The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.

Ulasan Produk


0 ulasan

- / 5.0


  • 0 Keranjang Belanja
  • Wishlist
  • Pusat Voucher
  • Informasi
  • Log In / Daftar
  • Kotak Kejutan
  • Berbagi
  • Kembali
  • Kembali Keatas
  • ©2024 PG MALL. All Rights Reserved.